How do I register my Target Blu Eye 1?

Install Blu Eye in your vehicle before registering the system, and install the included antenna using Installer Mode (pre-installed on Blu Eye). This is the only way to ensure optimal performance.

If you are using a Blu Eye that was previously installed in another vehicle, first download and activate Installer Mode to determine the best, interference-free location for the antenna.

HOW TO OBTAIN YOUR ACTIVATION FILE

1. Switch off the vehicle’s ignition. This will also turn off the Blu Eye system.

2. Insert the supplied SD card into the SD card slot of your Blu Eye.

3. Turn on the ignition.

4. The unique serial number of your Blu Eye will now be copied to the SD card.

5. All LEDs will turn on for 5 seconds. Once the 5 signal strength indicator LEDs turn off and only the 2 blue LEDs remain on, the process is complete (this takes approximately 5 seconds).

6. Turn off the ignition.

7. Remove the SD card from your Blu Eye.

8. Insert the SD card into your computer’s SD card slot (PC or Mac).

9. Click the "Browse" button to locate the file.

10. You will be prompted to select the activation file with a unique serial number (UNIQUEID.TXT) stored on the SD card in order to register your system. Click "Browse", locate the SD card, and open the file "UNIQUEID".

11. Click "Upload file".