Note
According to our information, you are currently in United States, where Blu Eye products are not operational at the moment. Keep me informed about updates
Menu
8 reviews
10/10
My basket

My cart

You currently do not have any products in your cart.

Home FAQ Registration & Activation Target Blu Eye 2

Registration & Activation Target Blu Eye 2

How do I activate my Target Blu Eye 2?

IMPORTANT

Before mounting the system, first connect the display (or both displays when using both LED and LCD types) to the Blu Eye receiver.
Do not install the system yet. Connect it only to the 12V power supply of the vehicle.

Download and install the activation file (firmware) for Blu Eye 2

(LED Display method)

Getting and Installing the Activation File

  1. Turn off the vehicle’s ignition. This will also switch off the Blu Eye system.

  2. Insert the supplied USB drive into the USB connector on the Blu Eye unit.

  3. Turn the ignition on. The system will now copy the Device List to the USB drive.
    This process is complete when the status LED flashes alternating red and white.

  4. Turn off the ignition.

  5. Remove the USB drive from the Blu Eye.

  6. Insert the USB drive into the USB connector of your PC or Mac.

  7. Assign a name to this Blu Eye unit. For example, use the customer’s name, vehicle registration number, or the make and model of the vehicle. This helps you easily identify the system later for updates.

  8. Click “Choose file” and select the relevant device list file located in the “devices” folder on the USB drive.

  9. Click “Upload file”.

  10. Once the device list is shown, click “Download firmware”.

  11. Copy the downloaded firmware file to the “Firmware” folder on the USB drive.

  12. Remove the USB drive from your PC or Mac.

  13. Insert the USB drive into the Blu Eye USB connector.

  14. Turn on the ignition: Blu Eye will now copy the new firmware from the USB drive.
    The status LED will turn white during the update.
    When the status LED turns green, the firmware has been successfully installed and the system is ready for use.

  15. Turn off the ignition and remove the USB drive from the Blu Eye.

How can I update the firmware on my Blu Eye 2?

Below you will be guided step-by-step through the procedure to update the firmware on your Blu Eye 2.

1. Click "Download firmware": The new firmware will be saved with the filename [identifier] in the download folder on your PC or Mac.
2. Copy this file to the "Firmware" folder on the USB drive.
3. Turn off the car ignition. This also switches off the Blu Eye system.
4. Insert the USB drive into the USB port of the Blu Eye.
5. Turn on the ignition: Blu Eye will now copy the new firmware from the USB drive. The status LED will light up white. When the status LED turns green, the firmware has been successfully saved and the system is ready for use.
6. Turn off the ignition and remove the USB drive from the USB port of the Blu Eye.

How can I adjust the configuration of my Blu Eye 2?

When expanding the system with one or more modules or replacing a module, the new module(s) must be included in the configuration. Follow these steps:

1. Turn off the car ignition. This also switches off the Blu Eye system.
2. Insert the supplied USB drive into the USB connector of Blu Eye.
3. Turn on the ignition: the new “Device List” will now be copied to the USB drive.
4. Blu Eye will start with a red status LED and an audio signal: this warns that an unknown module (device) has been detected that is not yet active. Then the status LED turns green.
5. Turn off the ignition.
6. Remove the USB drive from Blu Eye.
7. Insert the USB drive into the USB connector of your PC or Mac.
8. Select the system whose configuration you want to adjust.
9. Click “adjust configuration”.
10. Click “Choose file” to select the relevant devicelist in the “devices” folder on the USB drive.
11. Click “upload file”.
12. You will now see an overview showing all connected devices (green) and/or removed devices (red).
13. If this is correct, click “save changes”.
14. Click “Download firmware”: the new firmware will be saved with the filename [identifier] in the download folder on your PC or Mac.
15. Copy this file to the “Firmware” folder on the USB drive.
16. Turn off the car ignition. This also switches off the Blu Eye system.
17. Insert the USB drive into the USB connector of Blu Eye.
18. Turn on the ignition: Blu Eye will now copy the new firmware from the USB drive. The status LED will light white. When the status LED turns green, the firmware has been successfully saved and the system is ready for use.
19. Turn off the ignition and remove the USB drive from the USB connector of Blu Eye.

Back to overview